I have a solution for you, but the Tekonsha # 118252 is designed for the 2019 Lexus RX350 F1 Sport with the towing package Additionally, it's only a 4 way and if your RV has a 7 way plug you'll need to add that as well.. You'll want to use the Tekonsha # 118255 which comes with the converter box that will plug into your tail lights and allow you to power the lights on a trailer and provide you with a 4 way plug that is the base of any 7 way connector that doesn't come factory installed... view full answer...
I have a solution for you, but the straps that come with the # EM09160 will only safely fit up to 30 inch diameter tires. There's not a complete kit available that will work, but you can add the Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523 to replace the straps in the # EM09160 and they'll allow you to secure your RZR with 35 inch tires. view full answer...
Yes, the Curt Trailer Hitch Receiver # C13272 is confirmed to fit the 2016 Lexus RX 350 F Sport. This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. There is no drilling required for installation.
If your 2016 Lexus RX 350 F Sport has the tow package # 56083 is the correct wiring harness. view full answer...
It sounds like you're looking for the 4 way trailer plug for your 2013 Lexus RX 350; I recommend using the Tekonsha # 118255 because we've found that the powered converters on the Tekonsha harnesses are some of the most reliable available. This kit will tee into your tail lights and provide you with a 4 way flat to tow a trailer with and this is compatible with your 2013 RX 350 without the factory towing package.
If you also need a ball mount, hitch ball and hitch pin you can get that... view full answer...
The VIN unfortunately is pretty useless to us, though I do wish we could get some use of it. So with that said, we aren't going to be able to tell you if your car has the factory tow package or not.
There is a pretty easy way you can check yourself though. What you'd normally do is just peek underneath your car and see if you can spot a trailer hitch. If you see a hitch there it's a good chance you've got the tow package, but since you just said you installed a hitch there's a good chance... view full answer...
I have the perfect solution for you to easily add a brake controller to your 2008 Lexus RX 350 without running a bunch of wires.
If you install the 7-Way RV Upgrade Kit # ETBC7L then all you need to do is connect the adapter to your current 4-Way and then route the black wire to your battery through the included circuit breaker. This then gives you the lighting functions and 12V power on your 7-Way.
Once this is installed the brake controller you will use is the Curt Echo # C51180. This... view full answer...
The Curt # C13272 does not have a plate that will allow you to mount the Mounting Bracket 4-Pole Flat # 18144, but you can use the included self tapping screws in the # 18144 kit to mount the bracket on your bumper.
If you wanted to avoid putting holes on the underside of your bumper, you'll want to use the # 18136 (short bracket) or # 18140 (long bracket). Either of these 2 brackets will attach to your hitch receiver tube and then allow you to attach the # 18144 for a completely drill... view full answer...
For a trailer hitch, the Curt # C13272 Class III hitch would be my recommendation. I prefer the finish Curt uses on their trailer hitches.
For a trailer wiring harness, I'd go with the Curt # C56217. For a ball mount, use # C45010 and # 63845 for a trailer ball.
Rental trailers will use an adjustable coupler, so it'll work fine with the 2 inch trailer ball I recommended. If the trailer is large enough to require brakes (above 1500 lbs, I believe) the trailer will have a surge coupler,... view full answer...
I went ahead and looked for a set of ISSE Classic Snow Socks, and unfortunately I was unable to find a set that fits your tire however I do have another alternative for you.
Instead, check out the:
-Konig Tire Chains - Diamond Pattern - Square Link # TH2004705255.
These chains are going to be just a bit more pricey than the Snow Socks, however they will provide excellent traction in the snow or ice, is made for cars with restricted wheel wells like your Lexus, and will automatically... view full answer...
Exactly what constitutes a towing prep package can vary widely among vehicle makers and models and can depend on whether the additional equipment was factory- or dealer-installed. Sometimes a 'tow-package-equipped' vehicle may still need fuses and/or relays installed to activate the wiring.
There is a good chance the wiring is in place already. You can check under your rear bumper for any signs of wiring for a trailer connector and test them using a circuit tester like # PTW2993, or you... view full answer...
Without a doubt you're going to need a set of crossbars to mount the Thule Hullavator # TH898 to your 2010 Lexus RX 350, however to use two of these on the same set of bars you'd need bars that are around 60" long.
Unfortunately the longest set of bars we have for your vehicle are the Thule WingBar Evo Crossbars # TH711320 with the feet # TH710401 which are 50" long so you're not going to be able to do what you're wanting.
Instead, I'd recommend going with two sets of the Malone DownLoader... view full answer...
We can help you with all the items you'll need to get your RX 350 ready for trailer towing.
Starting with a hitch, I suggest the Curt 2-inch Class III hitch # C13143. This hitch installs without drilling and includes all the mounting hardware. The linked video will show you the entire process.
You'll also need a Class III ball mount and a hitch ball of the size required by your travel trailer. The linked article will help you select a ball mount with the right amount of rise or drop to... view full answer...
Yes. The etrailer License Plate Mounting Brackets for Hitch Mounted Cargo Carrier # e98944 is designed to be used on a cargo carrier like the etrailer # e98874. view full answer...
I would be happy to help you find a roof rack for your 2022 Lexus RX 350. I recommend a kit from Thule that is designed specifically for your Lexus by attaching to your roof rails and it will also accommodate your panoramic glass sunroof.
Fit Kit for Thule Evo Flush Roof Rack Feet - 186044 item # TH186044. These custom clips and pads let you mount Thule Evo Flush feet on your Lexus with flush, factory side rails. Clips attach to a mounting bolt in the foot assembly and tighten together... view full answer...
Kuat offers two different hitch locks, the # HL1 for the # B202-114 Beta that's designed for the 1-1/4 inch receiver and the # HL2 lock that's designed for the # B202-2 Beta rack that's designed for the 2 inch receiver. If the correct lock is used for the correct rack, no alterations of any kind will be necessary (we don't recommend altering the rack in any way, as it will compromise your warranty protection.) view full answer...
We have just what you're looking for. There are a few things you'll need for a complete towing package: hitch, wiring, ball mount, hitch ball and hitch pin/clips.
For a hitch I recommend using the Curt # C13143 because of the higher quality powder coat on the Curt hitches, which tends to stand up to the rigors of the road a bit better than the others available. This hitch has a 2" receiver and will bolt onto your 2010 Lexus RX 350 without any drilling required.
For wiring, I recommend... view full answer...
The Universal MightyMounts for Yakima Roof Mounted Accessories # Y03590 will be the adapter for your Mako Saddle and Hully Roller. It applies to factory crossbars no more than 4" wide or 1-1/2" tall. As a result, it will fit the factory roof rack on your 2013 Lexus RX 350 factory crossbars. There are a total of 4 MightyMounts included.
The Replacement Hardware for a Single Yakima Universal MightyMount # 8880056 has 4 screws included. And the Replacement Wrench for Yakima Universal MightyMount... view full answer...
No, trailer wiring harness # 118252 only provides the basic lighting functions (turn signals, brake lights, and running lights). If the trailer has electric brakes then you would need to add another connector, the most common of which is the 7-Way blade style.
After installing the 4-Way, # 118252 if the vehicle has the factory tow package or # 118478 if it does not, you would then install a 4 and 7-Way installation kit # ETBC7. I have included some links that explain this installation... view full answer...
I'm happy to help you get your RX 350 ready for pulling your new camping trailer and I wish you many good times in the future.
Starting with a hitch, I recommend the USA-made etrailer Class III hitch # e94AR for its simple no-drill installation (it includes all the hardware) and for its substantial 4000-lb towing capacity. It installs as shown in the written instructions, which is linked for reference. I also suggest ball mount kit # 989900 which provides multiple ball mounts and sizes... view full answer...
On your 2011 Lexus RX350 without a tow package, the wiring harness you will need is the Tow Ready T-One Wiring Harness, part # 118478. This harness will plug into connection points located behind the RX350 tail lights. It uses a powered Modulite converter that will draw power directly directly from the vehicles battery via an in-line fuse so your electrical system is safe.
I am including a link to the installation instructions on the Tow Ready wiring harness.
In addition to the wiring... view full answer...
Go To Results